CALEO - The Original Heating Film

The only heating film with CNT SMART technology.

  • Intelligent power optimization
  • For floor and ceiling heating
  • 5 + 5 years warranty
  • 80-130-160W/m2 performance
  • WiFi Thermostat
CALEO - The Original Heating Film

Floor and ceiling heating

CALEO CNT heating films are available in different sizes and performance for the installation of surface heating systems. Both the 80W and 130W are suitable for underfloor heating, while the high-performance CNT30 product range of 160W/m2 can only be installed as wall and ceiling heating. Heating film technology is a unique opportunity for the modern building and construction industry.

heating film under laminated floor

Post-construction floor heating. Using heating film, it is possible to install independent heating systems or even the comfort heating of just one room quickly and at low investment costs. Extra-thin installation layers allow for creating a surface heating without the demolition of the existing concrete.

floor heating film insatallation
floor heating film insatallation
floor heating film insatallation
ceiling heating film installation

The new heating film - CNT Smart technology

After developing the heating foil product in 2005, in 2008 BVF-CALEO holding, contrary to other producers, decided to avoid spending its resources on the unreliable, “self-regulating”, so-called PTC technology, and turned towards the distinctively different CNT (carbon Nano tube) system development process with the active cooperation of engineers from Japan and South-Korea.

A near seven-year development process has resulted in a patented technology that no other manufacturer has been able to catch up with . Our technology has not only achieved significant efficiency gains, but it has become a benchmark for operational safety and extreme load capacity.

caleo film heater
CNT inside - made in Korea

230V

Standard supply voltage

CNT Technology

Unlimited lifetime

30-50-80cm

Factory-made width

6mm

Installation thickness with thermal insulation

No more heating foil

Learn more about BVF-CALEO’s latest surface heating technology that replaces the “old heating film”, which had been developed since 2005 through 4 generation types. In the production technology, the use of the CNT (carbon Nano tube) heat exchanger with extreme load capacity is a real innovation.

The brand new CALEO 80-130 heating film, which complies with all European requirements and standards, provides a more economical and safe operation when compared to conventional electric floor heating and heating films.

Caleo heating film

Extreme load capacity already in 0,4mm

Caleo heating film

Design cuttable
by 25cm

Caleo heating film

Patented
silver mesh

On both sides of the CALEO heating film, there are high purity copper conductors attached to a Nano-tech heating element through a patented trapezoid-silver mesh. Electrical resistance is generated between the two conductors, which warms up the special carbon heating element to its optimum temperature. The heating film transfers its own heat to the flooring through heat transfer / heat conduction.

CALEO heating films consist of five layers and basically 4 main components. The production of these components from from carefully selected raw materials, their treatment in a heat chamber, as well as the high quality laminating of the layers are indispensable requirements for producing a robust final product. The quality of raw materials and Nano-technological printing also play an important role in achieving maximum efficiency.

Video

Elements of the underfloor heating system

1 / a. Laminate flooring, parquet floor coverings

CALEO heating film

Compared to traditional heating films and “inflatables”, the leading CALEO 80-130 heating film product line is manufactured to European requirements and standards. It ensures highly economical and safe operation. The lifetime of premium CALEO films is unlimited, with a manufacturer’s warranty.

VIEW LAYER ORDER

CALEO floor heating layer order

  1. Úsztatott burkolat
  2. PE párazáró fólia
  3. CALEO fűtőfilm
  4. XPS hőszigetelő lap
  5. Hőszigetelt aljzatbeton

1 / b. Elements of wall and ceiling heating system

CALEO ceiling heating

30cm wide for standard mounting. Compared to traditional heating films and “inflatables”, the market-leading CALEO 160 heating film, tailored to European requirements and standards, provides  highly economical and safe operation. The lifetime of premium CNT heating films is unlimited, with a manufacturer’s warranty.

VIEW LAYER ORDER

CALEO ceiling heating layer order

  1. Úsztatott burkolat
  2. PE párazáró fólia
  3. CALEO fűtőfilm
  4. XPS hőszigetelő lap
  5. Hőszigetelt aljzatbeton

2. Approved Installation Accessories

CALEO accessories

We believe that our products offer a well-executed system. A heating system is more than just a heating element, it includes the insulation, structured layered elements and high-quality assembly aids. The warrantee and reliable operation are only available with Approved Installation Accessories.

3. Optional thermostats and control systems

BVF Heato thermostat

In the case of electric heating systems, each room is an independent heating circuit. Choose the controls that best suit your needs and budget. The standard programmable thermostats also offer significant savings, but our zone control system and the latest WiFi-capable thermostats deliver better results than ever with maximum comfort.

Comparison

Following the development of the heating foil product in 2005, BVF-CALEO holding in 2008, contrary to other producers, decided to avoid spending its resources for the, unreliable, “self-regulating”, so-called PTC technology, and turned towards the distinctively different CNT (carbon nano tube) system development process with the active cooperation of engineers from Japan and South-Korea.

standard heating film

Standard heating films

Caleo heating film

CALEO Heating Film

STANDARD
FILM HEATERS
CALEO
HEATING FILM
HEATING SURFACE80%92%
HEATING SURFACE TEMPERATUREHIGHER AT CARBON LINEEVEN SURFACE TEMPEREATURE
LAMINATION2X PET + EVA4X PET + EVA
WING SIZE15mm10mm ONLY
CARBON-SILVER COMPOUNDSTANDARD CARBON SHEETCNT TECHNOLOGY (CARBON NANO TUBE)
COPPER LOAD CAPACITYCOPPER 6AHIGH DENSITY PURE COPPER BUS BAR 8A
EFFICIENCYHIGH 98%HIGHEST 99,8 %
ELECTRIC SAFETYSTANDARDREDUCED LEAKING CURRENT (LESS THAN 0,15mA / m2)
WARMING-UP SPEEDNORMALFASTER BY BIGGER HEATING SURFACE AND LOWER WING SIZE
LIFETIMESEMI-PERMANENTPERMANENT

GET A QUOTE

CONTACT THE MANUFACTURER NOW

Floor heating installation with Heating Film

Fast and flexible work. The installation of the heating film systems is always carried out by a manufacturer-qualified specialist, who follows a strict layout. When designing an independent heating system, prior to construction the calculation of the required capacity per square meter is also the responsibility of a specialist.

1. Providing a dry, dust-free concrete surface
2. Positioning of thermal insulation sheets
3. Placement of heating film according to plans
4. Creating and testing factory-grade connections
5. Connecting thermostat and floor sensor
6. Fixing a vapor barrier layer
7. Preparation of a measurement report

Technical data

  • Performance range:
    80W – 130W – 160W/m²
  • Width:
    30-50-80-100 cm
  • Insulation:
    Double insulation
  • Thickness:
    0,388mm
  • Wiring:
    Connector set
  • Suggested controller:
    Dual Sensor (BVF Heato8)

Frequently Asked Questions

DOES IT FULLY HEAT UP THE ROOMS?

Yes,  Electric floor heating installed with heating film can heat up everything that can be heated by traditional water circulation floor heating. Nevertheless, it can be also used for more comfort or as additional heating by means of setting the performance and the thermostat. In the case of doors and windows with big surfaces, the installation of perimeter heating is reasonable. In such cases, heating films with higher performance are installed below the cooling structures.

WHAT IS THE MONTHLY CONSUMPTION OF FLOOR HEATING?

Heating does not have individual consumption. The heated building has an energy demand, which can be determined at a yearly level, with the same calculation that is used for the preparation of energy certificates. Expected heating costs can be determined based on the thermal insulation values of the walls, floors, doors and windows with a precision of 5%.

CAN I PLACE FURNITURE ON FLOOR HEATING?

Yes, you can. CNT smart technology allows heating films to be operated in a covered state, directly under the furniture. The use of CALEO products allows free interior design. The placement of fixed built-in furniture (kitchen counter, built-in wardrobe) can be deducted from the area to be laid during the design work.

CAN I INSTALL HEATING FILMS UNDER STONE COVERS OR FLOOR TILES?

No, you can’t. The tile adhesive cannot bind on plastic (PET) surfaces as this would result in a surface that cannot be covered. however,  by installing a 3mm ply over the Heating film stone/ceramic tiles can then be installed.

WHAT IS THE EXPECTED SERVICE LIFE OF HEATING FILMS IN YEARS?

Without any mechanical damage, CALEO CNT heating films have an unlimited life. This means a minimum 50 heating seasons without a decrease in performance, which is many times more than the obsolescence time of an average building heating system. During the above period it does not need revisions under guarantee or maintenance.

WHAT WILL THE TEMPERATURE OF THE HEATED FLOOR BE, AND HOW QUICKLY IS IT REACHED?

Relevant standards do not distinguish between electric and water circulation floor heating. Pursuant to the above globally accepted health limit values, floor temperatures should be between 29 and 31°C. Heating time is short, it varies between 15 and 45 minutes, which also depends on the initial and current temperature of the room.

WHEN IS CEILING HEATING BETTER THAN FLOOR HEATING?

Presently there is no heating solution that is better from a heat technical aspect and more comfortable than floor heating. Ceiling heating is recommended in buildings where very low installed performance is needed (AA+, nearly passive or certified passive house), and in light-structure buildings where plasterboard suspended ceilings are part of the construction.
Ceiling heating is also reasonable in the cases of overfurnitured rooms as in such cases the floor cannot provide a sufficient exothermic surface because beds and cupboards cover at least 60% of the floor, or when you choose a cover that is incompatible with floor heating, e.g.: bamboo, carpet.
Combined systems: Each room is an independent heating circuit so the concerned building can include both floor and ceiling heating according to your needs.